Home > Products > Water treatment > Fertigation

Fertigation

Under the term fertigation refers to a technique that allows fertilisers to be distributed together with irrigation water. This technique became more popular with the spread of micro-irrigation and/or drip irrigationis preferably applied with thelocalised irrigation and/or with the sub-irrigation. It can also be done with other irrigation systems, but for better fertiliser distribution the above systems are preferred.
The distribution of fertilisers in water improves the uptake of nutrients by plants and at the same time makes water use more efficient. In practice, fertigation achieves a synergetic effect between water and fertiliser.

ATLANTA TP25

ATLANTA TP25

Real-time and historical data available directly to any Modbus-connected device or PC, including alarms to help guide effective maintenance planning and rapid technical intervention Wide range of flow rates up to...

ATLANTA TP25

ATLANTA TP15

Real-time and historical data available directly to any Modbus-connected device or PC, including alarms to help guide effective maintenance planning and rapid technical intervention Wide range of flow rates up to...

ATLANTA TM

ATLANTA TM

Real-time and historical data available directly to any Modbus-connected device or PC, including alarms to help guide effective maintenance planning and rapid technical intervention Wide range of flow rates up to...

Nexus 3000

Nexus 3000

SINGLE PARAMETER READING The instrument's very large display allows all operating parameters to be viewed. The instrument can handle the following measurements: pH, Rx, Conductivity, Chlorine amperometric, mA input potentiostatic sensors, Sono...

PSD4 BS

PSD4 BS

The PSD4 probe holder series is an advanced housing for hydraulic flow connections. The electrode always in contact with the medium guarantees the best measurement reliability. With 4 different models, every need is met...

PSD4 T

PSD4 T

The PSD4 probe holder series is an advanced housing for hydraulic flow connections. The electrode always in contact with the medium guarantees the best measurement reliability. With 4 different models, every need is met...

PSD4 B

PSD4 B

The PSD4 probe holder series is an advanced housing for hydraulic flow connections. The electrode always in contact with the medium guarantees the best measurement reliability. With 4 different models, every need is met...

PSD4 TS

PSD4 TS

The PSD4 probe holder series is an advanced housing for hydraulic flow connections. The electrode always in contact with the medium guarantees the best measurement reliability. With 4 different models, every need is met...

NEXUS 5500

NEXUS 5500

Compact and easy to use, it allows measurement of the following parameters: pH / Rx, free chlorine, conductivity, temperature and mA input (organic/inorganic free chlorine, organic/inorganic total chlorine, bromine, H₂O₂, peracetic acid, chlorine dioxide, ozone)....

NEXUS 5000

NEXUS 5000

Removable electrical connection Numbered connection positions ABS plastic casing Power supply Universal power supply unit 100- -240 Vac 50/60 Hz Power supply Low 12 -32 Vdc or 24 Vac CE compliant Output configuration: All outputs are available in the...

NEXUS 2000

NEXUS 2000

Display and button panel2 lines, 16 alphanumeric characters.4 buttons for calibration and programming. External box and power supply4 types of external box: 1. PP wall version (IP65) 2. Panel version: 96x96 IP65 3. Panel version; 48x96...

TAURUS TM 2-4-6

TAURUS TM 2-4-6

Main features Eccentric mechanism with spring return, enclosed in an aluminium casing in an oil bath Manual pump adjustment Stroke 2-4-6 mm Flow rates min 5,5 ÷ max 460 lt/h max pressure 10 bar on request 16 bar for specific models...

TAURUS TM 07

TAURUS TM 07

Flow rates: up to 120LT/H Maximum pressure: 5 BAR Motor: 0.06 KW-3PH IP55 380VAC 50/60HZ Motor: 0.06 KW-1PH IP55 110 220VAC 50/60HZ Pulses: 144 pulses/minute Stroke: 5-6.8 mm Diaphragm diameter: 70mm Pump head: SS 316/PVDF Maximum temperature: SS316/352/...

TAURUS TMP

TAURUS TMP

TMP metering pumps offer a high level of reliability with exceptional value for applications up to 12 Bar and flow rates up to 530 l/h A range of compact, lightweight, robust and simple metering pumps designed for low discharge pressures,...

TAURUS TP 25

TAURUS TP 25

Eccentric type mechanism with spring return, enclosed in an aluminium casing in an oil bath Manual stroke adjustment Stroke 25 mm Max. flow rate 40÷1000 l/h Max. pressure 20 bar Fixed frequency 58/116 strokes/min Piston diameters 25÷89 mm Piston motors 25÷89 mm...

TAURUS TP 15

TAURUS TP 15

Eccentric mechanism with spring return, enclosed in an aluminium casing in an oil bath Manual stroke adjustment Stroke 15 mm Max. flow rate 1,5÷304 lt/h Max. pressure 20 bar Fixed frequency 58/116 strokes/min Piston diameter 6÷24 mm Motors 0,18/0,25 kW ...

ATHENA MR 12 VDC

ATHENA MR 12 VDC

PVDF PUMP BODY suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and chemical compatibility PTFE DIAPHRAGM resistance and compatibility with all products...

ATHENA AT AIR-CONDITION

ATHENA AT AIR-CONDITION

CONSTANT FLOW ANALOGUE WITH MANUAL ADJUSTMENT AND TIMED DOSAGE WITH DOUBLE 'T on - T off' ADJUSTMENT Specially designed to meet the needs of small volumes to be dosed Specific pump for odour abatement Nebuliser included in the dosing kit...

ATHENA MP

ATHENA MP

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and chemical compatibility DIAPHRAGM PTFE resistance and compatibility with all chemical...

ATHENA BT

ATHENA BT

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and full chemical compatibility PTFE DIAPHRAGM resistance and compatibility with all products...

ATHENA PR

ATHENA PR

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and full chemical compatibility PTFE DIAPHRAGM resistance and compatibility with all products...

ATHENA BX 12VDC

ATHENA BX 12VDC

CONSTANT FLOW RATE ANALOGUE and ANALOGUE INTERFACE Double manual flow rate adjustment 0 ÷20%, 0 ÷100% Manual purge valve PVDF head PTFE diaphragm Ceramic balls IP65 protection

ATHENA BX

ATHENA BX

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and chemical compatibility DIAPHRAGM PTFE resistance and compatibility with all chemical...

ATHENA BL

ATHENA BL

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and full chemical compatibility PTFE DIAPHRAGM resistance and compatibility with all products...

ATHENA MT

ATHENA MT

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and chemical compatibility DIAPHRAGM PTFE resistance and compatibility with all chemical...

ATHENA AM

ATHENA AM

PUMP BODY PVDF suitable for chemicals used in industrial applications, water treatment and drinking water purification CERAMIC BALL dosage reliability and full chemical compatibility PTFE DIAPHRAGM resistance and compatibility with all products...

We only use our own and third party cookies to improve the quality of your browsing experience, to deliver personalised content, to process statistics, to provide you with advertising in line with your preferences and to facilitate your social networking experience. By clicking accept, you consent to the use of these cookies.

Privacy Settings saved!
Settings

When you visit a website, it may store or retrieve information on your browser, mainly in the form of cookies. Check your personal cookie services here.


Used to detect whether the visitor has accepted the marketing category in the cookie banner. This cookie is required for GDPR compliance of the website. Type: HTTP Cookie / Deadline: 2 years
  • Google

Reject all Services
Accept all Services